Belt sanderW
Belt sander

A belt sander or strip sander is a sander used in shaping and finishing wood and other materials. It consists of an electric motor that turns a pair of drums on which a continuous loop of sandpaper is mounted. Belt sanders may be handheld and moved over the material, or stationary (fixed), where the material is moved to the sanding belt. Stationary belt sanders are sometimes mounted on a work bench, in which case they are called bench sanders. Stationary belt sanders are often combined with a disc sander.

Biscuit joinerW
Biscuit joiner

A biscuit joiner or biscuit jointer is a woodworking tool used to join two pieces of wood together. A biscuit joiner uses a small circular saw blade to cut a crescent-shaped hole in the opposite edges of two pieces of wood or wood composite panels. An oval-shaped, highly dried and compressed wooden biscuit is covered with glue, or glue is applied in the slot. The biscuit is immediately placed in the slot, and the two boards are clamped together. The wet glue expands the biscuit, further improving the bond.

MortiserW
Mortiser

A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.

ChainsawW
Chainsaw

A chainsaw is a portable gasoline-, electric-, or battery-powered saw that cuts with a set of teeth attached to a rotating chain driven along a guide bar. It is used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks in wildland fire suppression, and harvesting of firewood. Chainsaws with specially designed bar-and-chain combinations have been developed as tools for use in chainsaw art and chainsaw mills. These specialized chainsaws are used for cutting concrete during construction developments. Chainsaws are sometimes used for cutting ice, for example, ice sculpture and winter swimming in Finland.

Circular sawW
Circular saw

A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor. A hole saw and ring saw also use a rotary motion but are different from a circular saw. Circular saws may also be loosely used for the blade itself. Circular saws were invented in the late 18th century and were in common use in sawmills in the United States by the middle of the 19th century.

DeWaltW
DeWalt

DeWalt Industrial Tool Company is an American worldwide manufacturer of power tools and hand tools for the construction, manufacturing and woodworking industries. DeWalt is a registered trademark of Black & Decker (U.S.) Inc., a subsidiary of Stanley Black & Decker.

Domino joinerW
Domino joiner

The Domino is a loose mortise and tenon joining tool manufactured by the German company Festool.

Fein (company)W
Fein (company)

C. & E. Fein GmbH is a manufacturer of high-end power tools located in Stuttgart, Germany. Founded in 1867 by brothers Wilhelm Emil Fein and Carl Fein, the company invented the hand-held electric drill in 1895 and was responsible for many other innovations. Fein became famous for its grinders, electric screwdrivers, and Fein Multimaster RS.

Jigsaw (tool)W
Jigsaw (tool)

A jigsaw is a saw which uses a reciprocating blade to cut irregular curves, such as stenciled designs, in wood, metal, or other materials. Today they are electrically powered and known as scroll saws, and have been largely displaced by portable power jigsaws.

Laminate trimmerW
Laminate trimmer

A laminate trimmer is a small version of a wood router, normally used to trim laminate such as Formica. It generally has a 1/4-inch collet. Typical laminate trimmers spin their bits at up to 30,000 RPM. Some models provide variable speed control. Manufacturers of note include Dewalt, Ryobi, Porter Cable, Ridgid, Makita and RotoZip (Bosch)

MetaboW
Metabo

Metabowerke GmbH with its headquarters in Nürtingen, Germany is a manufacturer of high quality power tools for professional users. The company was founded in the 1920s and got its name from a hand drill, the so-called "Metallbohrdreher". Today, Metabo offers a wide range of power tools.

Nail gunW
Nail gun

A nail gun, nailgun or nailer is a type of tool used to drive nails into wood or some other kind of material. It is usually driven by compressed air (pneumatic), electromagnetism, highly flammable gases such as butane or propane, or, for powder-actuated tools, a small explosive charge. Nail guns have in many ways replaced hammers as tools of choice among builders.

Random orbital sanderW
Random orbital sander

Random orbital sanders are hand-held power tools for sanding in which the sanding blade delivers a random-orbit action. That is, the angle of rotation of the head and disk is variable. Perhaps the first introduced in 1976 by Festool but in 1982, random orbit sanders combine the speed and aggressiveness of a belt sander with the ability to produce a finer finish than that available from a standard, slow speed orbital finishing sander. Random orbital sanders generally come in three different types: electric powered, air powered, and orbital floor sanders. The electric and air powered orbital sanders are handheld, while the floor orbital sanders are large machines that roll.

Reciprocating sawW
Reciprocating saw

A reciprocating saw is a type of machine-powered saw in which the cutting action is achieved through a push-and-pull ("reciprocating") motion of the blade.

Router (woodworking)W
Router (woodworking)

A router is a hand tool or power tool that routs an area in hard material, such as wood or plastic. Routers are mainly used in woodworking, especially cabinetry. Usually they're handheld or fastened, with the cutting end up, in router tables.

Sabre sawW
Sabre saw

The sabre saw is a hand-held powered reciprocating saw. It is similar to, but larger than, a jigsaw.

SanderW
Sander

A sander is a power tool used to smooth surfaces by abrasion with sandpaper. Sanders have a means to attach the sandpaper and a mechanism to move it rapidly contained within a housing with means to hand-hold it or fix it to a workbench. Woodworking sanders are usually powered electrically, and those used in auto-body repair work by compressed air. There are many different types of sanders for different purposes. Multi-purpose power tools and electric drills may have sander attachments.

SawStopW
SawStop

SawStop is a table saw manufacturer headquartered in Tualatin, Oregon, US. The company was founded in 2000 to sell table saws that feature a patented automatic braking system that stops the blade upon contact. According to an NPR article in 2017, roughly 10 table saw finger amputations occur daily in the United States.

Track sawW
Track saw

Track saws are a type of hand-held circular saw which slides on a guide rail during operation. This allows the operator to perform long and accurate cuts. Track saws, unlike hand-held circular saws, plunge into the material to a pre-determined depth during the cut, increasing operator safety and allowing for reduced splintering and tear-out; the depth-of-cut is not fixed and can be adjusted to be just slightly over the thickness of the board being cut. This property allows a track saw to also cut shallow grooves into the workpiece, if necessary.