35 Sentinel class cutters

The Sentinel-class cutter, also known as Fast Response Cutter due to its program name, is part of the United States Coast Guard's Deepwater program. At 46.8 metres (154 ft) it is similar to, but larger than the 123-foot (37 m) lengthened 1980s-era Island-class patrol boats that it replaces. Up to 58 vessels are to be built by the Louisiana-based firm Bollinger Shipyards, using a design from the Netherlands-based Damen Group, with the Sentinel design based on the company's Damen Stan 4708 patrol vessel. The Department of Homeland Security's budget proposal to Congress, for the Coast Guard, for 2021, stated that, in addition to 58 vessels to serve the Continental US, they requested an additional six vessels for its portion of Patrol Forces South West Asia.

USCGC Angela McShan (WPC-1135) is the United States Coast Guard's 35th Sentinel-class cutter.

USCGC Bailey Barco (WPC-1122) is the United States Coast Guard's 22nd Sentinel-class cutter, and the second to be stationed in Alaska, where she was homeported at Coast Guard Base Ketchikan.

USCGC Benjamin Dailey (WPC-1123) is the United States Coast Guard's 23rd Sentinel-class cutter. She is the first cutter of her class stationed in the Coast Guard's Eight District, with a homeport in Pascagoula, MS.

USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.

USCGC Charles David Jr is the seventh Sentinel-class cutter. Upon her commissioning she was assigned to serve in Key West, Florida, the first of six vessels to be based there. She was delivered to the Coast Guard, for testing, on August 17, 2013. She was officially commissioned on November 16, 2013.

USCGC Charles Moulthrope (WPC-1141) is the United States Coast Guard's 41st Sentinel-class cutter, and the first of six to be homeported in Manama, Bahrain.

USCGC Charles Sexton (WPC-1108) is the eighth Sentinel-class cutter, and the second to be based in Key West, Florida. She was delivered to the United States Coast Guard for a final evaluation and shakedown on December 10, 2013, and the vessel was commissioned on March 8, 2014.

USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.

USCGC Donald Horsley (WPC-1117) is the United States Coast Guard's 17th Sentinel-class cutter. She was commissioned on May 20, 2016. She was the fifth of a cohort of six FRCs home-ported in San Juan, Puerto Rico.

USCGC Edgar Culbertson (WPC-1137) is the United States Coast Guard's 37th Sentinel-class cutter, and the second of three to be homeported in Galveston, Texas.

USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.

USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.

USCGC Heriberto Hernandez is the 14th Sentinel-class cutter delivered to the United States Coast Guard. Like five of her sister ships, her initial assignment will see her based in San Juan, Puerto Rico.

USCGC Isaac Mayo is a Sentinel-class cutter homeported in Key West, Florida. She is the twelfth Sentinel class to be delivered, and the sixth of six to be assigned to Key West.

USCGC John McCormick (WPC-1121) is the United States Coast Guard's 21st Sentinel-class cutter, and the first to be stationed in Alaska, where homeported at Coast Guard Base Ketchikan.

USCGC Joseph Doyle (WPC-1133) is the United States Coast Guard's 33rd Sentinel-class cutter. She was completed, and transferred to Coast Guard, in Key West, for her acceptance trials, on March 21, 2019. She was commissioned on June 8, 2019, and the first of a second cohort of cutters commissioned in San Juan, Puerto Rico. The first batch of six cutters were commissioned there in 2015 and 2016.

USCGC Joseph Gerczak (WPC-1126) is the 26th Sentinel-class cutter built for the United States Coast Guard. She will be the second member of the three members of her class to be homeported in Honolulu, Hawaii.

USCGC Joseph Napier is a Sentinel-class cutter homeported in San Juan, Puerto Rico. She is the fifteenth Sentinel class to be delivered, and the third of six to be assigned to Puerto Rico. she was commissioned on 29 January 2016.

USCGC Joseph Tezanos (WPC-1118) is the United States Coast Guard's 18th Sentinel-class cutter. She was commissioned on August 26, 2016. She was the sixth of the first cohort of six FRCs home-ported in San Juan, Puerto Rico.

USCGC Kathleen Moore is the ninth Sentinel-class cutter by Bollinger shipyards delivered to the United States Coast Guard. She was delivered to the Coast Guard, for pre-commissioning testing, on March 28, 2014.

USCGC Lawrence Lawson is the 20th Sentinel-class cutter to be delivered to the United States Coast Guard. She was built at Bollinger Shipyards, in Lockport, Louisiana, and delivered to the Coast Guard, for her sea trials, on October 20, 2016. She was commissioned on March 18, 2017. She is the second cutter of her class to be the homeported at the Coast Guard Training Center in Cape May, New Jersey, and also the second to be stationed outside of the Caribbean.

USCGC Margaret Norvell (WPC-1105) is the fifth Sentinel-class cutter , based at Miami, Florida after commissioning. She was launched on January 13, 2012, and delivered to the Coast Guard on March 21, 2013. She was commissioned on June 1, 2013. She was commissioned at Mardi Gras World in New Orleans, near where her namesake staffed her lighthouse for decades.

USCGC Myrtle Hazard (WPC-1139) is the United States Coast Guard's 39th Sentinel-class cutter.

USCGC Oliver Berry (WPC-1124) is the United States Coast Guard's 24th Sentinel-class cutter. She was the first member of the three members of her class to be homeported in Honolulu, Hawaii.

USCGC Paul Clark (WPC-1106) is the sixth Sentinel-class cutter. Like the previous five vessels she is homeported in Miami, Florida. She was delivered to the Coast Guard, for testing, on May 18, 2013.

USCGC Raymond Evans is the tenth vessel in the United States Coast Guard's Sentinel-class cutter. All the vessels are named after members of the Coast Guard, or its precursor services, who are remembered for their heroism. Names had already been assigned for the first fourteen vessels, when Commander Raymond Evans died, and the USCG Commandant announced that the next Sentinel class cutter would be named after him. Joseph Napier, who was originally scheduled to be the namesake of the tenth vessel, had his name moved to the beginning of the second list of heroes names, and will now be the namesake of the fifteenth vessel.

USCGC Richard Etheridge is the second of the United States Coast Guard's Sentinel-class cutters. Like most of her sister ships she replaced a 110-foot (34 m) Island-class patrol boat. Richard Etheridge was launched in August 2011.

USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. She is the first of her class to be home-ported in Atlantic Beach, North Carolina.

USCGC Robert Ward (WPC-1130) is the 30th Sentinel-class cutter, and the second of four assigned to the San Pedro Coast Guard station, adjacent to Los Angeles, California.

USCGC Robert Yered (WPC-1104) is a Sentinel-class cutter based in Miami, Florida. She was launched on November 23, 2012, and was commissioned on February 15, 2012. Debbie Wasserman Schultz, the Congressional Representative for the district containing the vessel's base, met the ship when she arrived in Miami on January 27, 2013.

USCGC Rollin Fritch is the US Coast Guard's 19th Sentinel-class cutter, and the first to be homeported outside of the Caribbean. She is based at the Coast Guard Training Center in Cape May, New Jersey.

USCGC William Flores (WPC-1103) is a Sentinel-class cutter homeported in Coast Guard District 7, Miami, Florida.

USCGC William Trump (WPC-1111) is a Sentinel-class cutter of the United States Coast Guard. When it was delivered to the Coast Guard, on November 25, 2014, it was the eleventh vessel, of its class, and the fifth vessel based in the Coast Guard's station in Key West, Florida.

USCGC Winslow Griesser (WPC-1116) was the sixteenth Sentinel-class cutter to be delivered. She will be the fourth of six Sentinel-class vessels to be stationed in San Juan, Puerto Rico. Bollinger shipyards delivered her to the United States Coast Guard, in Key West, Florida, on December 23, 2015. After she completed her acceptance trials, she was commissioned on March 11, 2016.